APC MGE SNMP/Web Card Manual de usuario descargar pdf (Pagina 14)

Network

Management Card

User Manual

Network Management Card

– User Manual 34003676EN/HA

Page

14/81

•

• Battery operation

•

• Load powered by main AC

•

• Loss of communication with the UPS

•

• Battery fault

“Communication”: indicates the status of the communication between the card and the UPS

“Power source”: indicates whether the power comes from the utility or from the UPS battery

“Batteries”: indicates whether the battery is being charged or discharged

“Output load level”: indicates the power percentage used at UPS output

“Output”: indicates if the UPS output is protected, Powered or not Powered

3.2.1.3 “Battery status” zone:

◗ “Bargraph”: Graph showing the remaining battery charge (in percent).

◗ “Battery charge level”: Remaining battery charge (in percent).

◗ “Remaining backup time”: Estimation of the maximum backup time remaining before UPS shutdown.

This time can be modified by the adjustments on the “Shutdown parameters” page

◗ “Last periodical test”: Result of the last automatic battery test carried out by the UPS

Possible values are:

- OK: the test was completed correctly

– NOK: the battery needs to be checked

– Deactivated: the automatic battery test is not validated on the UPS

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 80 81

Sin comentarios

APC MGE SNMP/Web Card Manual de usuario Pagina 14