APC Switched Rack Power Distribution Unit (PDU) Guía de usuario descargar pdf (Pagina 17)

®®

USER’S GUIDE

switched rack pdu

Control Console

How to Log On

Overview

You can use either a local (serial) connection, or a remote (Telnet)

connection to access the control console.

Use case-sensitive User Name and Password entries to log on (by default,

apc and apc, for an Administrator, or device and apc, for a Device

Manager).

Remote access to the control console

You can use Telnet to log on to the control console.

1. At a command prompt, type telnet and the System IP address for

the Switched Rack PDU (when the PDU uses the default telnet port of

23), and then press E

NTER. For example:

telnet 139.225.6.133

2. Enter your user name and password.

If you cannot remember your user name or password, see

How to Recover From a Lost Password.

If the PDU uses a non-default port number (between 5000

and 32767), you need to include a colon or a space

(depending on your telnet client) after the IP address and

then the port number.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 92 93

Sin comentarios

APC Switched Rack Power Distribution Unit (PDU) Guía de usuario Pagina 17