APC NBRK0550 Guía de instalación descargar pdf (Pagina 14)

NetBotz Wireless Temperature Sensor Installation Guide

Monitoring the Wireless Temperature Sensor

Overview

Once your wireless sensor network is installed and receiving power, you can

begin monitoring your system using the software interface for the appliance.

See your appliance installation and quick configuration manual for

system installation details and for instructions on accessing the

software interface of the appliance.

Sensor listing

When a Wireless Temperature Sensor is selected in the Navigation Pane in

Advanced View, the following sensors are listed in the Sensor Pane:

Receiving and sending data

The Coordinator on the wireless sensor network passes data back and forth

between the host appliance and any Routers or End Devices on the wireless

sensor network as necessary.

If there is a change of

1ºC or 1% RH or more, each Wireless Temperature Sensor

sends its own data every 30 seconds. If there is no change, the Wireless

Temperature Sensor waits up to three (3) minutes before sending sensor data to

indicate it is still alive.

The Wireless Temperature Sensor does not extend the wireless network or pass

data to other Wireless Temperature Sensors, or other End Devices on the

network.

Sensor Description

Temperature The temperature sensor reading.

Humidity The humidity sensor reading (NBWS100H only)

Battery The voltage of the battery.

RSSI The Received Signal Strength Indicator. This lists the

strength of the wireless signal between the sensor and the

Router or Coordinator to which it sends data.

A reading above 30% is ideal.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sin comentarios

APC NBRK0550 Guía de instalación Pagina 14