APC RAID Subsystem SCSI-SATA II Manual de usuario Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 105
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
- 75 -
5.6 VD clone
The user can use VD clone function to backup data from source VD to target VD, set
up backup schedule, and deploy the clone rules.
The procedures of VD clone are on the following:
1. Copy all data from source VD to target VD at the beginning (full copy).
2. Use iSnap technology to perform the incremental copy afterwards. Please be fully
aware that the incremental copy needs to use snapshot to compare the data
difference. Therefore, the enough snapshot space for VD clone is very important.
The following contents will take an example of a RAID 5 virtual disk
(SourceVD_Raid5) clone to RAID 6 virtual disk (TargetVD_Raid6).
Start VD clone
1. Create a RAID group (RG) in advance.
Figure 5.6.1
2. Create two virtual disks (VD) “SourceVD_R5” and “TargetVD_R6”. The raid type
of backup target needs to be set as “BACKUP”.
Figure 5.6.2
3. Here are the objects, a Source VD and a Target VD. Before starting clone
process, it needs to deploy the VD Clone rule first. Click “Configuration”.
RAG362
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 104 105

Comentarios a estos manuales

Sin comentarios