APC ACRC301S Guía de usuario descargar pdf (Pagina 35)

Network Management Card: Quick Configuration

InfraStruXure InRow RC—Operation and Maintenance 29

2. When the Network Management Card reboots, the BOOTP server provides it with the TCP/IP

settings.

– If you specified a bootup file name, the Network Management Card attempts to transfer that file

from the BOOTP server using TFTP or FTP. The Network Management Card assumes all

settings specified in the bootup file.

– If you did not specify a bootup file name, the Network Management Card can be configured

remotely by using the control console or the Web interface. User name and password are both

apc, by default.

DHCP. You can use a RFC2131/RFC2132-compliant DHCP server to configure the TCP/IP settings for

the Network Management Card.

1. A Network Management Card sends out a DHCP request that uses the following to identify itself:

– A Vendor Class Identifier (APC by default)

– A Client Identifier (by default, the Network Management Card’s MAC address value)

– A User Class Identifier (by default, the identification of the Network Management Card’s

application firmware)

2. A properly configured DHCP server responds with a DHCP offer that includes all of the settings

that the Network Management Card needs for network communication. The DHCP offer also

includes the Vendor Specific Information option (DHCP option 43). By default, the Network

Management Card will ignore DHCP offers that do not encapsulate the APC cookie in the Vendor

Specific Information option using the following hexadecimal format:

Option 43 = 01 04 31 41 50 43

where

– the first byte (

01) is the code

– the second byte (

04) is the length

– the remaining bytes (

31 41 50 43) are the APC cookie

Sin comentarios

APC ACRC301S Guía de usuario Pagina 35