Apc UPS control system Manual de usuario descargar pdf (Pagina 61)

Logging Test

Once you have established that the proper processes are running, do a tail

of the system log ﬁle, normally /var/log/messages:

tail /var/log/messages

You should see output that looks similar to the following:

Dec 5 17:01:05 matou apcupsd[5917]: apcupsd 3.7.2

startup succeeded

And if you have conﬁgured the network information server, you should also

see:

Dec 5 17:01:05 polymatou apcupsd[5975]: apcserver

startup succeeded

These messages should also appear in the temporary ﬁle

(/etc/apcupsd/apcupsd.events) if you are using the default conﬁgu-

ration ﬁle. If you have installed the RPM, they will probably be in

/var/log/apcupsd.events.

apcaccess Test

This test consists of running apcaccess to see if apcupsd is properly updat-

ing its internal variables. Please note that if you are running a pthreaded

version of apcupsd, which you should be since the non-pthreaded version

is no longer supported, (installed from rpm or --enable-pthreads on

the ./configure line), you must enable the apcupsd Network Information

Server in your conﬁguration ﬁle for apcaccess to work. This is done by

setting:

NETSERVER on

NISPORT 3551

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 232 233

Sin comentarios

Apc UPS control system Manual de usuario Pagina 61