APC AR1100 Manual del operador descargar pdf (Pagina 61)

OPERATING PROCEDURES: AR (refractive error) and KM (corneal curvature radius) Measurements

{ CATARACT measurement mode

If cataract or abnormal eyes cannot be measured during AR (refractive error) measurement, cataract

measurement mode turns on automatically.

In cataract measurement mode, measurement conditions are changed so as to enhance ease of mea-

surements of even cataract or abnormal eyes.

When the device is placed in cataract measurement mode,

“ ” is displayed on the screen and then measurement

starts

The auto-tracking and auto-shooting functions

work in the same manner as ordinary measure-

ment mode.

One of the following operations cancels cataract measurement mode:

• Switching the eye to be measured between the right eye and left eye.

• Pressing the clear button .

• Pressing the print button .

Printout sample in cataract measurement mode

According to the 45. CAT MARK parameter set-

ting, “ ” indicating that measurement has been

taken in cataract measurement mode is printed

as shown on the right.

* Factory setting: NO

• In cataract measurement mode, take note that measurement variations may occur more

commonly compared to normal measurement mode.

ᵏᴷᴰǽǽǽǽǽᵈᴷᴰǽ

ᵐᴪǽᴮ

ᴫ

ᴯᴲǽᵏᴮǽǽᴴᴫᴶᴵǽᴮᴴᴰ

ᵀᴪǽᴭ

ᴫ

ᴴᴲǽᵏᴯǽǽᴴᴫᴲᴶǽǽᴵᴰ

ᴾǽǽǽǽǽᴯ

ᵏ

ᴥᴶᴦ

Symbols of cataract measurement mode

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 143 144

Sin comentarios

APC AR1100 Manual del operador Pagina 61