APC AP9613 Manual de instalación Pagina 26

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 36
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 25
22
Installation Manual
Installing cards in an expansion chassis
Install the lowest-priority cards in any available card slots in the UPS, and then use
an expansion chassis for remaining higher-priority cards. In a Triple Expansion
Chassis:
Install each card, starting with the lowest priority (see “Before you start” on
page 21) in the lowest-numbered slot.
If you are installing an NMC, install it in slot 3, even if you are leaving
another slot empty.
Installing cards in an expansion chassis set up serially
If you have increased your management card capacity by connecting multiple
expansion chassis serially (in a cascading setup), install the NMC in the highest-
numbered slot, and the Out-of-Band Management Card in the second-highest-
numbered slot of the chassis installed farthest from the UPS.
Warning: Do not attach more than two NMCs or one Building
Management Integration Card to a UPS.
If the NMC is pre-installed in the UPS, refer instead to “When an NMC has been
pre-installed.” on page 23
Installing cards in a Symmetra UPS
If you are installing an NMC without an attached expansion chassis, install that card
in the highest numbered slot, even if you are leaving other slots empty. If you are
using an expansion chassis, see “Installing cards in an expansion chassis” on
page 22.
Triple Expansion Chassis (AP9604BLK), three
slots
All UPS devices
Chassis Compatible UPS Devices
21
Status
Power
Monitoring Por t
To U P S
24 VDC
–+
3
Probes
1 2
Sensor Zones
AP9612 TH Envi ronmenta l Moni toring Car d
1 2 3 4
GND
Management Port
Stat us
AP9608 Out- of-Band M anagemen t Card
1
2
3
Smar t Sl ot
A 963 Network Management Card 2P1
USB
Config
Universal I/O Universal I/O
Reset
10/100
Network
mph0461
DMP IM 990-3404.book Page 22 Monday, March 11, 2013 9:05 AM
Vista de pagina 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Comentarios a estos manuales

Sin comentarios