APC MGE Galaxy 300 Guía de usuario descargar pdf (Pagina 28)

Network Management Card User’s Guide19

netstat

Access: Administrator, Device User

Description: View the status of the network and all active IPv4 and IPv6 addresses.

ntp

Access: Administrator

Description: View and configure the network time protocol parameters.

Example 1: To enable the override of manual setting, type:

ntp -OM enable

Example 2: To specify the primary NTP server, type:

ntp -p 150.250.6.10

ping

Access: Administrator, Device User

Description: Determine whether the device with the IP address or DNS name you specify is connected

to the network. Four inquiries are sent to the address.

Example: To determine whether a device with an IP address of 150.250.6.10 is connected to the

network, type:

ping 150.250.6.10

-sr <scan rate in mSec> Set the scan rate for query packets in Master mode. (MGE Galaxy

models only)

-rep <# of repetitions> Set the number of repetitions for query packets in Master mode. (MGE

Galaxy models only)

-ResetToDef Reset the modbus settings to their default values.

Option Argument Definition

-OM enable | disable

Override the manual settings.

-p <primary NTP server> Specify the primary server.

-s <secondary NTP server> Specify the secondary server.

Argument Description

<IP address or DNS name> Type an IP address with the format xxx.xxx.xxx.xxx, or the DNS

name configured by the DNS server.

Option Argument Description

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 104 105

Sin comentarios

APC MGE Galaxy 300 Guía de usuario Pagina 28