
188
To delete an individual learned entry or all learned
entries, the FdbId should be set to a valid value in
case of IVL. In SVL case, this value is ignored
except when the value is 4097, which is the value
of a special Vlan Id used for managing the traffic
for those VLANs that are neither created nor
learned in the system. When Vlan transparency
feature is supported, the valid range for this also
includes 4097. VLAN here means the 802.1q Vlan
in case of Native Vlan mode and Virtual Vlan in
case of Stacked Vlan Mode.
Type: Delete - Optional
Get - Optional
Valid values: 0 -4096
macaddr <macaddr-
val>
In the case of "delete all" entries corresponding to
a port in a given FDB; the MacAddr shall have
INVALID value specified by FF: FF: FF: FF: FF:
FF. To delete an individual entry, valid value of
Mac address has to be specified.
Type: Delete - Optional
Get - Optional
Example
$ get bridge port forwarding portid 10 vlanid 10 macaddr 02:03: ee:
34:55:66
Output
Port Id : 10 vlan id : 10
Mac Addr : 02:03:ee:34:55:66
Status : Mgmt
Output Fields
Field Description
Port Id
Port number of the port on which a frame
having a source address equal to the value of
the corresponding instance of
dot1qTpFdbAddress, has been seen. This
may have a value of "0" if the statically
configured address has a dynamic port
binding and the port has not been learnt yet.
vlan id
Vlan Id to uniquely identify the entry for which
the bridge has forwarding and/or filtering
information. To delete an individual learned
entry or all learned entries, the FdbId should
be set to a valid value in case of IVL. In SVL
case, this value is ignored except when the
value is 4097, which is the value of a special
Vlan Id used for managing the traffic for those
VLANs that are neither created nor learned in
the system. When Vlan transparency feature
is supported, the valid range for this also
includes 4097. VLAN here means the 802.1q
Vlan in case of Native Vlan mode and Virtual
Vlan in case of Stacked Vlan Mode.
Mac Addr
In the case of "delete all" entries
corresponding to a port in a given FDB; the
MacAddr shall have INVALID value specified
by FF: FF: FF: FF: FF: FF. To delete an
individual entry, valid value of Mac address
has to be specified.
Status
The status of this entry. The value learned
(3), indicates that the value of the
corresponding instance of dot1qTpFdbPort
was learned, and is being used. mgmt (5) -
the value of the corresponding instance of
dot1qTpFdbAddress is also the value of an
existing instance of dot1qStaticAddress. The
Comentarios a estos manuales