APC IP DSLAM Guía de usuario descargar pdf (Pagina 238)

100

101

230

AtucChanPerfAtmCD : 10 AtucChanPerfAtmCU : 10

AtucChanGsINPdn : 10 AtucChanGsL0dn : 10

AtucChanGsM0dn : 10 AtucChanGsT0dn : 10

AtucChanGsB0dn : 10

Output Fields

FIELD Description

Ifname

The ADSL ATUC channel interface name.

Interleave Delay(ms)

Interleave delay for this channel.

Curr Tx Rate(bps)

Actual transmit rate on this channel.

Prev Tx Rate(bps)

The rate at the time of the last

adslAtucRateChangeTrap event.

Crc Block

Length(byte)

Indicates the length of the channel data-block, on

which the CRC operates.

Gs Curr Atm Status

Indicates the current ATM Status.

GsSymbolsPerRsWor

Indicates the number of DMT symbols per Reed-

Solomon code word (S), in the downstream

direction.

GsRsDepth

Indicates interleaving depth (D), in the

downstream direction.

GsRedundantBytesPe

rRsCode

Indicates the number of redundant bytes (R), per

Reed-Solomon code in the downstream direction.

AtucChanPerfAtmCD

Provides a count of the total number of cells

passed through the cell delineation and HEC

function process operating on the ATM Data Path

while in the SYNC state.(length = 4 bytes).

AtucChanPerfAtmCU

Provides a count of the total number of cells in the

ATM Data Path delivered at the logical interface

between the ATU-C and a digital network element,

such as one or more switching systems.

AtucChanGsINPdn

The actual number of Impulse Noise

Protection(INP) symbols for the downstream

interleaved channel. One symbol equals 250 µs,

so an INP of 1 correlates to a correction time of

250 µs.

AtucChanGsL0dn

The number of bits from the upstream latency path

function #0 included per DMT symbol.(length = 4

bytes). It is not available for ADSL.

AtucChanGsM0dn

The number of Mux Data Frames per FEC Data

Frame in upstream latency path function

#0.(length = 4 bytes). It is not available for ADSL.

AtucChanGsT0dn

The ratio of the number of Mux Data Frames to

the number of sync octets in the upstream latency

path function #0.(length = 4 bytes). It is not

available for ADSL.

AtucChanGsB0dn

The nominal number of octets from frame bearer

#0 per Mux Data Frame at Reference Point A in

upstream latency path function #0.(length = 4

bytes). It is not available for ADSL.

8.9.4 ADSL ATUC Chanperf Commands

8.9.4.1 Get adsl atuc chanperf

Description: Use this command to get.

Command Syntax: get adsl atuc chanperf [ifname <interface-name>]

Parameters

Name Description

ifname <fname-val>

The ADSL ATUC channel interface name, for

which performance is to be viewed.

Type : Get － Optional

Valid values : dsli-0 - *, dslf-0 - *

Example

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 602 603

Comentarios a estos manuales

Sin comentarios

APC IP DSLAM Guía de usuario Pagina 238

Comentarios a estos manuales

Relacionado con productos y manuales para Redes APC IP DSLAM