APC IP DSLAM Guía de usuario descargar pdf (Pagina 412)

100

101

404

if igmphCodeCmpType is any.

IGMP code comparison

IGMP code comparison type

Start group address

Start group address of the range of igmp group

addresses.This field is invalid if

'igmpgroupaddrcmp' is 'any'. This field and

'groupaddrto' specify a range of IGMP group

addresses, if 'igmpgroupaddrcmp' is either

'inrange' or 'exrange'

End group address

End group address of the range of igmp group

addresses. This field and 'groupaddrfrom'

specifiy a range of IGMP group addresses, if

'igmpgroupaddrcmp' is either 'inrange' or

'exrange'

IGMP group address

comparison

IGMP group address comparison type

Subrule Priority

This specifies the priority of the subrule. Based

on this priority value, the subrule is created in

fast or slow memory. In case priority is specified

as 'asinrule', subrule priority will be same as

specified in the rule.

Transport Header

This specifies the type of the transport header in

the packet in which the corresponding IP is

being transported. If the value of this field is

Ethernet(0x1), then the IP is being carried in the

ethernet header. If it is pppoe(0x2), then the

corresponding IP is being carried in the PPP

header.

References

• Generic Filter commands

8.13.33 Filter subrule IP Commands

8.13.33.1 Get filter subrule ip

Description: Use this command to get.

Command Syntax: get filter subrule ip [ruleid <ruleid-val>]

[subruleid <subruleid-val >]

8.13.33.2 Create filter subrule ip

Description: Use this command to create.

Command Syntax: create filter subrule ip ruleid <ruleid-val >

subruleid <subruleid-val > [ srcipaddrfrom <srcipaddrfrom-val > ]

[ srcipaddrto <srcipaddrto-val > ] [ dstipaddrfrom <dstipaddrfrom-val

> ] [ dstipaddrto <dstipaddrto-val > ] [ prototypefrom <prototypefrom-

val > ] [ prototypeto <prototypeto-val > ] [ srcaddrcmp eq | neq | lt |

leq | gt | geq | any | inrange | exrange | ingenlist | notingenlist ]

[ dstaddrcmp eq | neq | lt | leq | gt | geq | any | inrange | exrange |

ingenlist | notingenlist ] [ prototypecmp eq | neq | lt | leq | gt | geq |

any | inrange | exrange ] [ ipsrcaddrmask <ipsrcaddrmask-val> ]

[ ipdstaddrmask <ipdstaddrmask-val> ] [ subruleprio low | high |

asinrule ] [ transporthdr ethernet | pppoe ] [ tosfrom <tosfrom-val> ]

[ tosto <tosto-val> ] [ tosmask <tosmask-val> ] [ toscmp eq | neq | lt

| leq | gt | geq | any | inrange | exrange ]

8.13.33.3 Delete filter subrule ip

Description: Use this command to delete.

Command Syntax: delete filter subrule ip ruleid <ruleid-val >

subruleid <subruleid-val >

1 2 ... 407 408 409 410 411 412 413 414 415 416 417 ... 602 603

Comentarios a estos manuales

Sin comentarios

APC IP DSLAM Guía de usuario Pagina 412

Comentarios a estos manuales

Relacionado con productos y manuales para Redes APC IP DSLAM