APC IP DSLAM Guía de usuario descargar pdf (Pagina 379)

371

action this parameter should contain trap level 0

(trap disabled) or 1 (trap enabled). Other values

are invalid for this action. For modifytos action

this parameter should contain value to be set in

TOS field in the packet in the range 0 to 255.

Other values are invalid for this action. The

application of this value is dependent on the

mask parameter. For setbaclevel action this

parameter should contain valid Buffer Admission

Control level value of 0 or 1. For pktvlanid and

pktservicevlanid actions this parameter should

be filled with VLAN ID value in the range 1 to

4094. For mirror action this parameter should

be filled with valid mirror context id.

Action Mask

This field is valid for modifytos action only. Only

lower 8-bits are taken into consideration for

modifytos action and other bits are ignored. In

the mask if a bit location contains 1, then the

corresponding bit in the TOS field is overwritten

with the corresponding bit in action value. In the

mask if a bit location contains 0, then the

corresponding bit in the TOS field remains

unchanged.

8.13.22 Filter rule entry Commands

8.13.22.1 Get filter rule entry

Description: Use this command to get.

Command Syntax: get filter rule entry [ruleid <ruleid-val>]

8.13.22.2 Create filter rule entry

Description: Use this command to create.

Command Syntax: create filter rule entry ruleid r<ruleid-val>

pktvlanid | retagvlanid | pktservicevlanid | retagservicevlanid |

retagserviceprio | ratelimiter | Mirror ] [ description <description-val> ]

[ priority <priority-val> ] [ status enable | disable ] [ statsstatus enable

| disable ] [ ruleprio low | high ] [ ruledir in | out ] [ applywhenreq

enable | disable ] [ pkttype Mcast | Bcast | Ucast ] [ snooplevel

interface | bridge ] [ exprid <exprid-val> ] [ actionval <actionval-val> ]

[ actionmask <actionmask-val> ]

8.13.22.3 Delete filter rule entry

Description: Use this command to delete.

Command Syntax: delete filter rule entry ruleid <ruleid-val >

8.13.22.4 Modify filter rule entry

Description: Use this command to modify.

Command Syntax: modify filter rule entry ruleid <ruleid-val>

pktvlanid | retagvlanid | pktservicevlanid | retagservicevlanid |

retagserviceprio | ratelimiter | Mirror ] [ description <description-val> ]

[ priority <priority-val> ] [ status enable | disable ] [ statsstatus enable

| disable ] [ ruleprio low | high ] [ applywhenreq enable | disable ]

[ pkttype Mcast | Bcast | Ucast ] [ snooplevel interface | bridge ]

[ exprid <exprid-val> ] [ actionval <actionval-val> ] [ actionmask

<actionmask-val> ]

Parameters

1 2 ... 374 375 376 377 378 379 380 381 382 383 384 ... 602 603

Comentarios a estos manuales

Sin comentarios

APC IP DSLAM Guía de usuario Pagina 379

Comentarios a estos manuales

Relacionado con productos y manuales para Redes APC IP DSLAM