APC Network Management Card AP9617 Guía de usuario descargar pdf (Pagina 15)

®®

USER’S GUIDE

network management card

Features

AP9618 or AP9619 Description

9-pin connector

• Output relay (Output): Normally closed (NC), common

(COM), and normally open (NO) pins used by the

Integrated Environmental Monitor’s output relay at an

AP9618 or AP9619 Management Card.

• Power (Pwr): Normally-open ground (GND NO) and

+12VDC pins.

• Input contacts (Zone 1 and 2): Two sets of normally

closed (NC) and common (COM) pins used by the

Integrated Environmental Monitor at an AP9618 or

AP9619 Management Card.

Probe connector

Connects a Temperature/Humidity probe to the Integrated

Environmental Monitor at the AP9618 or AP9619

Management Card.

Modem connector

(AP9618 only)

Connects the internal analog modem at an AP9618

Management Card to an analog phone line to provide for

out-of-band communications.

All Management Cards Description

Reset button Resets the Management Card while power remains on.

10/100 Base-T connector Connects the Management Card to the Ethernet network.

Status LEDs See Status LED.

Link-RX/TX (10/100) LED See Link-RX/TX (10/100) LED.

1 To manage the Integrated Environmental Monitor, see Environment Menu.

2 To configure this feature for dial-in access to the control console at an AP9618 Network

Management Card, see Modem (AP9618 control console).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 189 190

Sin comentarios

APC Network Management Card AP9617 Guía de usuario Pagina 15