APC Network Management Card AP9617 Guía de usuario descargar pdf (Pagina 93)

®®

USER’S GUIDE

network management card

Reboot UPS This option restarts the attached equipment by doing the following:

• Turns off power at the UPS after the Shutdown Delay

• Turns on power at the UPS after the UPS battery capacity returns to

at least the percentage configured for Return Battery Capacity and

the UPS waits the time specified as Return Delay.

For a Synchronized Control Group action:

• This option turns off power at the UPSs that are enabled group

members after waiting the time configured as the initiating UPSs

Shutdown Delay

• The initiating UPS then waits up to the number of seconds specified

as Power Synchronized Delay to allow time for group members to

regain input power. If all group members have already regained input

power, this delay is omitted. If all group members regain input power

during the delay, the remainder of the delay is cancelled.

• The Return Delay then starts when the initiating UPS is at its

configured Return Battery Capacity.

• The Return Battery Capacity of the initiating UPS is also required of

group members, but you can reduce the capacity required of a group

member by configuring that member’s Return Battery Capacity

Offset (set at 10% by default). For example, if the initiator’s Return

Battery Capacity is set at 50%, and a member’s Return Battery

Capacity Offset is set to 5%, that member’s battery capacity will

need to be at only 45% for that member to reboot.

Reboot UPS

Gracefully

(control

console)

This action is performed similarly to the Reboot UPS action, but with an

additional delay before the shutdown portion of the action. The attached

equipment shuts down only after the UPS (or the initiating UPS for a

Synchronized Control Group action) waits the Maximum Shutdown

Time plus two minutes. For information about how the Maximum

Shutdown Time is determined, see Maximum-Shutdown-Time

negotiation.

Action Definition

1 When you select Yes for the Web interface’s Signal servers option, initiating a Turn UPS

Off, Reboot UPS, or Put UPS To Sleep action is equivalent to selecting Turn UPS Off

Gracefully, Reboot UPS Gracefully, or Put UPS To Sleep Gracefully in the control

console.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 189 190

Sin comentarios

APC Network Management Card AP9617 Guía de usuario Pagina 93