APC Network Management Card AP9617 Guía de usuario descargar pdf (Pagina 99)

®®

USER’S GUIDE

network management card

Shutdown Parameters

All of the following settings are available with Smart-UPS, Matrix-UPS,

Symmetra UPS, and Symmetra PX UPS models. A Silcon UPS uses only

the Low-Battery Duration, Maximum Shutdown Time, and Shutdown

Delay settings (under Shutdown Behavior Settings).

In the control console, use the Battery option in the

Configuration menu to access the Return Battery

Capacity setting.

Action Definition

Return Battery

Capacity

Defines the minimum battery capacity required before the UPS

turns on after a shutdown that was caused by a power failure.

OTE: The UPS must also wait the time defined by the Return

Delay setting before it can turn on.

Low-Battery

Duration

Defines how long the UPS can continue to run on battery power

after a low-battery condition occurs.

OTE: This setting also defines the time available for PowerChute

to safely shut down its server in response to the Control menu

options Turn UPS Off Gracefully, Reboot UPS Gracefully, and

Put UPS To Sleep Gracefully.

Maximum

Shutdown Time

(Web interface

only)

Reports the delay that is defined by the Maximum Shutdown

Time setting for the PowerChute Network Shutdown feature.

OTE: For information about the PowerChute Network Shutdown

feature, see PowerChute (UPS PowerChute Network Shutdown);

for information about how the Maximum Shutdown Time is

determined, see Maximum-Shutdown-Time negotiation.

Shutdown Delay Defines how long the UPS waits before it shuts down in response

to a turn-off command.

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 189 190

Sin comentarios

APC Network Management Card AP9617 Guía de usuario Pagina 99