APC Network Management Card AP9617 Guía de usuario descargar pdf (Pagina 65)

®®

USER’S GUIDE

network management card

SSL/TLS Server Certificate

Status: The Status field indicates whether a server certificate is installed. (To

display the status in the control console, choose Web/SSL/TLS, then

Advanced SSL/TLS Configuration.)

• Not installed: No certificate is installed on the Management Card.

OTE:If you install a certificate by using FTP or SCP, you must

specify the correct location (/sec) on the Management Card.

• Generating: The Management Card is generating a certificate

because no valid certificate was installed.

• Loading: A certificate is being loaded (activated on the Management

Card).

• Valid: A valid certificate was installed to or generated by the

Management Card. (If you install an invalid certificate, the

Management Card discards it and generates a valid one. However, a

certificate that the Management Card generates has some

limitations. See Method 1: Use APC’s default certificate.)

Filename: You can create a server certificate with the APC Security Wizard and

then upload it to the Management Card by using the Web interface.

Use the Browse button for the Filename field to locate the file, then

click Apply. By default, the certificate is installed to the correct

location.

Alternatively, you can use FTP or Secure CoPy (SCP) to transfer the

server certificate to the Management Card. However, you must specify

the correct location (/sec) on the Management Card.

OTE: Creating and uploading a server certificate in advance reduces

the time required to enable HTTPS (SSL/TLS). If no server certificate

is loaded when you enable HTTPS (SSL/TLS), the Management Card

creates one when it reboots. The Management Card can take up to 5

minutes to create this certificate, and the SSL/TLS server is not

available during that time.

Option Description

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 189 190

Sin comentarios

APC Network Management Card AP9617 Guía de usuario Pagina 65