APC Network Management Card AP9617 Guía de usuario descargar pdf (Pagina 44)

®®

USER’S GUIDE

network management card

Option Settings

TCP/IP

This option accesses the following settings:

• A Boot mode setting selects the method used to define the TCP/IP

values that a Management Card needs to operate on the network:

– System IP: The IP address of the Management Card

– Subnet Mask: The subnet mask value

– Default Gateway: The IP address of the default gateway

• Advanced settings define the Management Card’s host and domain

names, as well as TCP/IP port, BOOTP, and DHCP settings used by

the Management Card.

Current TCP/IP settings fields. The current values for System IP,

Subnet Mask, and Default Gateway, and the Management Card’s MAC

Address, Host Name, Domain Name, and Ethernet Port Speed values

are displayed above the TCP/IP settings in the control console and the Web

interface.

For information about the watchdog role the default

gateway plays, see

Resetting the network timer; for

information about how to configure the initial TCP/IP

settings when you install the Management Card, see the

Network Management Card Installation and Quick Start

Manual (.\doc\insguide.pdf), provided on the APC

Network Management Card utility CD and in printed form.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 189 190

Sin comentarios

APC Network Management Card AP9617 Guía de usuario Pagina 44