APC INROOM ACPSC3000 Instrucciones de operaciones descargar pdf (Pagina 100)

InRoom Controller - Operating Instructions100

Remote access to the control console

From any computer on the same subnet as the Network Management Card, you can use ARP and Ping to assign

an IP address to a Network Management Card, and then use Telnet to access the control console of that Network

Management Card and conﬁgure the needed TCP/IP settings.

Note: After a Network Management Card has its IP address conﬁgured, you can use Telnet, without

ﬁrst using ARP and Ping, to access that Network Management Card.

1. Use ARP to deﬁne an IP address for the Network Management Card, and use the MAC address

of the Network Management Card in the ARP command. For example, to deﬁne an IP address of

156.205.14.141 for a Network Management Card that has a MAC address of 00 c0 b7 7E 19 F3, use

one of the following commands:

– Windows command format:

arp -s 156.205.14.141 00-c0-b7-7E-19-F3

– LINUX command format:

arp -s 156.205.14.141 00:c0:b7:7E:19:F3

Note: The MAC address is located on a label on the underside of the Network Management

Card.The MAC address can also be accessed by using a Web browser to log in to the Network

Management Card and then selecting the Administration tab, the Network option on the top

menu bar, and TCP/IP on the left navigation menu

2. Use Ping with a size of 113 bytes to assign the IP address deﬁned by the ARP command. For the IP

address deﬁned in step 1, use one of the following Ping commands:

– Windows command format:

ping 156.205.14.141 -l 113

– LINUX command format:

ping 156.205.14.141 -s 113

3. Use Telnet to access the Network Management Card at its newly assigned IP address.

For example:

telnet 156.205.14.141

4. Use

apc for both user name and password.

See “Control console” on page 101 to ﬁnish the conﬁguration.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 106

Sin comentarios

APC INROOM ACPSC3000 Instrucciones de operaciones Pagina 100