APC INROOM ACPSC3000 Instrucciones de operaciones descargar pdf (Pagina 79)

79InRoom Controller - Operating Instructions

➊

➋

➌

➍

S3

S4

Service

The corresponding commands:

Display

Data

Data logger

Here you can adjust the basic conditions for

the data logger.

You can adjust sensor type

➊ and cycle ➋,

the interval in which measured values of the

corresponding sensor are stored.

Each data logger can store a maximum of

1440 datapoints. The 1441 datapoint deletes

the ﬁrst datapoint, the 1442 datapoint dele-

tes the second datapoint, etc.. If you adjust

a cycle of 1 minute you obtain a graphic for

a lapse of time of 1440 minutes, which cor

-

responds exactly to 24 hours. With a cycle of

2 minutes, datapoints for a lapse of 2 days

are stored, etc..

Regarding the fact that the graphic repre-

sents a width of 180 pixels, we recommend

to choose the cycle depending on the lapse

of time (Info menu) to be represented.

Lapse (Info menu) Cycle

- Hour 1 Min.

- Day 8 Min.

- Week 60 Min.

- Month 240 Min.

- Year 2880 Min.

Maintenance

This functionality helps you to maintain

the cooling unit by monitoring the service

intervals.

If the service interval has expired the mes

-

sage "service required" in combination with

the symbol is displayed in the standard

window.

Enter the desired service interval on the ﬁrst

line. Possible values are 0-12 months, with 0

months you avoid the monitoring

➋.

If you are on the ﬁeld "MAINT. DONE" and

you press the OK key, you conﬁrm the exe

-

cuted maintenance ➊. The controller then

sets the actual date in the middle line and

saves it.

By "1" you conﬁrm the execut-

ed maintenance.

TYPE parameters :

1 - Unit room temperature

2 - Unit room humidity

3 - Unit supply temperature

4 - Unit supply humidity

5 - Water temperature 1

6 - Outside temperature

7 - Outside humidity

8 - Condensation pressure 1

9 - Condensation temp. 1

10 - Evaporation pressure 1

11 - Evaporation temp. 1

12 - Zone room temperature

13 - Zone room humidity

14 - Zone supply temperature

15 - Zone supply humidity

The ﬁrst numeral designates the number of the data logger (1 or 2).

The second numeral stands for:

- the cycle in minutes

- the measured values listed at the top-left.

At the modiﬁcation of a parameter

(type or cycle) all data of the corres

-

ponding data logger is deleted.

The numbered callouts refer to the corres-

ponding passages in the descriptive text.

log 1 cycle 15

log 1 type 2

service 1

service int 4

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 105 106

Comentarios a estos manuales

Sin comentarios